Search Results

HOME PRODUCTS AQUATIC WATER TREATMENT CHEMICAL DOSING SKIDS FEEDER PACKAGES CONTACT US TECHNICAL VIDEOS General Terms and Conditions of Sale Privacy Policy Search Results More Aquatics The control of Chlorination & pH at specified levels is essential to ensure that micro-organisms in pool and spa water are kept under control. Health Department guidelines require chlorine levels in pools & spas be kept at specified levels. (refer Health Dept. Guidelines). A ProMinent automatic Water Chemistry Control System will control the chlorine & pH at the desired levels. Not only will a healthy pool/spa be provided for your patrons, economical use of chemicals will result. ProMinent offer a variety of water chemistry control systems for swimming pools and spa pools. Systems like: Chlorine (via Inorganic Sensor) & pH (Acid or CO2 dosing) Chlorine (via Organic Sensor) & pH (Acid or CO2 dosing) Chlorine (ORP) & pH (Acid or CO2 dosing). The control of pH is essential to maintain good disinfection. A change in the pH level affects the disinfecting power of Chlorine. As the pH rises the disinfecting power of the chlorine reduces. To view pool packages please visit Accessories Page and go to section 6 Pr o Cal ProMinent have developed a calcium hypochlorite preparation and dosing system for spas and pools. ProCal Brochure

HOME PRODUCTS AQUATIC WATER TREATMENT CHEMICAL DOSING SKIDS FEEDER PACKAGES CONTACT US TECHNICAL VIDEOS General Terms and Conditions of Sale Privacy Policy Search Results More Ozone As the most powerful oxidant that can be used in water treatment, ozone enables a broad spectrum of possible applications: Outstanding disinfection action against Bacteria and viruses Fungi and parasites Oxidation of undesirable inorganic substances in the water Iron and manganese Arsenic Nitrite and sulfide Oxidation of undesirable organic substances in the water Strong-smelling and strong-tasting compounds Humic substances and other compounds which affect the colour of the water Cyclic hydrocarbons Trihalomethanes, chloramines and other chlorine compounds Microflocculating action After oxidation with ozone, substances and colloids dissolved in the water become insoluble and can be filtered. Significantly less environmentally-harmful by-products occur in the production and use of ozone, than with other comparable oxidants and disinfectants. As a highly reactive gas, ozone is produced on site, and introduced to the water directly, without interim storage. Because of its high reactivity, ozone decomposes into oxygen again in the water, with a half-life of several minutes. All components of an ozone handling system must be perfectly matched with each other and with the planned application, to achieve an optimal relationship between ozone production and effect. For every new project, our engineers can draw on the experience that we have continually accumulated since 1971, in the following applications: Drinking water supply Oxidation of iron, manganese or arsenic Improvement in appearance and taste Disinfection Food and beverage industry Disinfection of mineral water Disinfection at the rinser in the beverage industry Disinfection of production water Aquatics Reduction of chloramines and trihalomethanes, so avoiding typical swimming pool smell Crystal-clear water thanks to microflocculating action Reliable microbiological barriers in therapy pools Reduction of investment and operating costs through the possibility of reducing the circulating power and throttling the fresh water inlet Industry Cooling water treatment Combating legionella in cooling water circuits Disinfection of process water Removal of odorous substances in air scrubbers BROCHURE

HOME PRODUCTS AQUATIC WATER TREATMENT CHEMICAL DOSING SKIDS FEEDER PACKAGES CONTACT US TECHNICAL VIDEOS General Terms and Conditions of Sale Privacy Policy Search Results More Fluoridation Fluoridation of drinking water remains the most significant dental health program in New South Wales and Australia. The advantage of water fluoridation is that the entire community benefits from the preventative measure, regardless of age, socioeconomic level, educational achievement, individual motivation, or the availability of dentists. Fluoride packages and installations have to meet strict guide lines. In New South Wales where ProMinent Australia have supplied more than 50 systems, there is a fluoride code, ‘Code of Practice for the fluoridation of Water Supplies Act 1957‘.This code was published by the Oral Health Branch of the Dept of Health and revised in April 2018. This code has also been accepted by other Australian states as the bench mark for fluoride installations. Fluoride is available commercially in 3 different ways, 2 are powders the other a liquid. Each display different concentrations of available fluoride ions & solubility. Powder Sodium fluoride (NaF) - most expensive 44% by weight available fluoride ion (solubility is 4.0%) Sodium Silicofluoride (Na2SiF6) - 60% by weight available fluoride ion (solubility = 0.4%) Liquid Hydrofluosilicic acid (H2SiF6) - liquid - 24% by weight available fluoride ion ProMinent Australia is one of the market leaders when it comes to providing powder fluoride systems. We have many years of experience with sodium silicofluoride volumetric feed packages and with sodium fluoride saturator packages. For the continuous monitoring of fluoride levels in water supplies, a ProMinent fluoride analyser is available with milliamp retransmit and alarms. The analyser is normally supplied as backboard mounted with temperature, fluoride and reference electrodes. A magnetic stirrer is also provided to assist with the single or two point calibration. Double validation monitoring is available. BROCHURE

HOME PRODUCTS AQUATIC WATER TREATMENT CHEMICAL DOSING SKIDS FEEDER PACKAGES CONTACT US TECHNICAL VIDEOS General Terms and Conditions of Sale Privacy Policy Search Results More Aquatic Water Treatment Clean water is the most important principle for the operation of all your aquatic operations. Our extensive product range offers every facility the greatest possible flexibility and cost-effectiveness for all steps of aquatic water treatment! Hygienically Clean Aquatics - step by step! Consistently clean water with fluctuating bather loads and economical operation are the desire of every facility. This is exactly what ProMinent equipment provide, as they are perfectly harmonised and ensure smooth interaction. This results in customised solutions that exceed the requirements. Our Product Range Measurement and Control Technology Metering Technology Water Treatment Technology Measurement and Control Technology Powerful measuring and control devices with precise sensors or panel-mounted measuring and control systems – ProMinent reliably monitors and controls the water treatment in your swimming pool. > DULCOMARIN 3 > DULCOMETER dialLog DACb > diaLog500 > diaLog600 > diaLog700 > diaLog800 > DULCONNEX > BAMa Modular Sensor Bypass Assembly Metering Technology ProMinent pumps are characterized by their robustness, consistently accurate metering performance and are versatile in use. They precisely dose which ensures excellent water quality. The DULCOLEVEL radar level sensor makes chemical management child’s play. > Solenoid Driven Metering Pump - beta > Solenoid Driven Metering Pump - gamma/ XL > Motor Driven Metering Pump - Sigma/ 3 S3Cb > Radar Level Sensor DULCOLEVEL Water Treatment Technology ProMinent systems are crafted to adapt to the evolving needs of your aquatic environment. With a range of versatile solutions, we offer systems to meet your specific water treatment requirements. > ProCal Granular Cal Hypo Feeder > ProCal mini Granular Cal Hypo Feeder > UV System DULCODES MP > Saltwater Chlorinators ElectrOline > Electrolysis System CHLORINSITU IIa > Electrolysis System CHLORINSITU III

HOME PRODUCTS AQUATIC WATER TREATMENT CHEMICAL DOSING SKIDS FEEDER PACKAGES CONTACT US TECHNICAL VIDEOS General Terms and Conditions of Sale Privacy Policy Search Results More Service for YOU Local Customer Service ProMinent have been supplying chemical dosing systems in Australia for over 40 years and carry extensive spare parts for all our products. We have installation and service personnel available anywhere in Australia. NSW Service & Spare Parts service@prominentfluid.com.au spares@prominentfluid.com.au 02 9450 0995 VIC Service & Spare Parts pfcvic@prominentfluid.com.au 03 8795 7430 QLD Service & Spare Parts serviceqld@prominentfluid.com.au 07 3213 1900 WA Service & Spare Parts pfcwa@prominentfluid.com.au

Chlorine Dioxide Chlorine dioxide is an extremely reactive gas, and because of its instability, cannot be stored. It must only be produced in the required quantities in special generators on the site where it is used. Chlorine dioxide offers a number of advantages when compared with chlorine for water disinfection. Chlorine being the disinfectant mainly used. The disinfecting power of chlorine dioxide actually increases slightly with increasing pH, whereas with chlorine the disinfecting power reduces. Chlorine dioxide remains stable in the pipeline system over a longer period and ensures microbiological protection of the water for many more hours, or even several days. Ammonia and ammonium, which cause significant chlorine depletion, are not attacked by chlorine dioxide, so chlorine dioxide is fully available for bactericidal action. Chlorophenols, the compounds with intense odours, that are often produced during water chlorination, are not formed when chlorine dioxide is used. Trihalomethanes (THMs), a group of substances, which, like their best known example, chloroform, (are suspected of being carcinogenic) are produced when chlorine reacts with natural water components (humic acids, fulvic acids, etc.). Measured THM concentrations, are drastically reduced, if present at all,when chlorine dioxide is used. Advantages of chlorine dioxide : Disinfection power is independent of pH. High residual effect thanks to long-term stability in the pipeline system. Reduction of the biofilm in pipelines and tanks, hence reliable protection of entire water systems against legionella contamination. No reaction with ammonia or ammonium. No formation of chorophenols and other intense odour compounds which can be produced in water chlorination. No formation of THMs and other chlorinated hydrocarbons, no increase in the AOX value. HOME PRODUCTS AQUATIC WATER TREATMENT CHEMICAL DOSING SKIDS FEEDER PACKAGES CONTACT US TECHNICAL VIDEOS General Terms and Conditions of Sale Privacy Policy Search Results More Bello Zon® CDLb Chlorine dioxide system for production of a chlorine-free chlorine dioxide solution, using the acid/chlorite process with diluted chemicals. 0 – 120 g/h preparation capacity with storage of up to 60 g of chlorine dioxide for peak metering. BROCHURE Bello Zon® CDEb Chlorine dioxide system which continuously produces ClO2 using the acid/chlorite process with diluted chemicals. Extremely simple operation, clear construction, analogue control, manual or control via contacts. 5 – 200 g/h chlorine dioxide. BROCHURE Bello Zon® CDKc Chlorine dioxide system for continuous production, metering and monitoring of chlorine dioxide with concentrated chemicals. With integrated intrinsically safe pre-dilution station 8 – 12,000 g/h chlorine dioxide. Max. flow at 0.2 ppm ClO2 metering is 60,000 m3/h BROCHURE Bello Zon® CDVc Chlorine dioxide system for monitoring and metering chlorine dioxide and diluted chemicals. 1 – 2,000 g/h chlorine dioxide. BROCHURE

HOME PRODUCTS AQUATIC WATER TREATMENT CHEMICAL DOSING SKIDS FEEDER PACKAGES CONTACT US TECHNICAL VIDEOS General Terms and Conditions of Sale Privacy Policy Search Results More ProMinent has the Engineering capabilities to assemble, test & deliver a wide range of custom designed chemical dosing skids. They range from applications for Oil & Gas, Progressive Cavity, Peristaltic Hose Pumps and Dry Chemical preparation & dosing. All ProMinent chemical dosing skids are fully engineered, assembled and factory tested before shipping to site. ProMinent provides all electrical controls, junction boxes and cabling as required. Factory Acceptance Test and ITP's are provided and completed by ProMinent personnel.

HOME PRODUCTS AQUATIC WATER TREATMENT CHEMICAL DOSING SKIDS FEEDER PACKAGES CONTACT US TECHNICAL VIDEOS General Terms and Conditions of Sale Privacy Policy Search Results More UV Disinfection UV radiation is a safe, chemical-free and reliable method of disinfection ideally suited for water disinfection in modern water treatment. ProMinent utilise the safety and reliability of UV disinfection in a wide range of applications. Dulcodes MP UV system Flow up to 569 m3/h The UV system Dulcodes MP is for water treatment and disinfection in swimming pools. Combined chlorine is broken down reducing the typical swimming pool odour and the irritation for eyes, nose and skin. BROCHURE Dulcodes LP UV system Flow up to 523 m3/h The unique UV systems Dulcodes LP – efficient and free of chemicals. Maximum flow output with fewer lamps and minimum energy resulting in lower life cycle costs. BROCHURE BROCHURE Dulcodes LP certified UV system Flow up to 410 m3/h For potable water disinfection, comprehensively certified to internationally-recognised DVGW / ÖNORM / SVGW / ACS / UVDGM standards. Highly efficient using Vario-Flux lamps with dynamic lamp heating. Dulcodes LP-PE (Plastic) UV systems Flow up to 505 m3/h Disinfect saline sea water or thermal water without corrosion problems with the UV system Dulcodes LP-PE Plastic. BROCHURE

HOME PRODUCTS AQUATIC WATER TREATMENT CHEMICAL DOSING SKIDS FEEDER PACKAGES CONTACT US TECHNICAL VIDEOS General Terms and Conditions of Sale Privacy Policy Search Results More ProMskid Chemical Dosing Suitable for 1 – 50 l/hr, 1–10 bar pressure ProMinent® are excited to announce the release of the new ProMskid Chemical Dosing Skid turnkey solution. The new ProMskid is a pre-engineered chemical dosing skid suitable for many chemical dosing applications. Utilising our reliable Metering Pump range, the ProMskid is a modular metering system that combines process reliability, efficiency and flexibility in single or multiple units. Features & Benefits Duty/Standby Dosing Skid utilising our Beta, Gamma X, Delta and Sigma 1 Metering Pump Range Chemical dosing skid has been designed for ease of installation and commissioning All proprietary cables are terminated into a junction box located inside the chemical dosing skid Robust PE Frame with splash guard for ultimate operator safety Flexible or rigid pump connections for suction and discharge Delivery Lead times 1 – 3 weeks from date of order, subject to stock availability Pipework & Fittings Georg Fischer Schedule 80 Grey uPVC Pipework Solvent weld connections Electrics Polycarbonate Junction Box Pump GPO’s on skid Pump Control wiring connected to junction box Dosing Skid Robust Polyethylene frame with removable splash guard Dimensions: 1200mm [w] x 635mm [d] x 1700mm [h] Spill collection tray Documentation Standard GA and P&ID drawing Standard Component Manuals Hydrostatic Test Certificate BROCHURE

HOME PRODUCTS AQUATIC WATER TREATMENT CHEMICAL DOSING SKIDS FEEDER PACKAGES CONTACT US TECHNICAL VIDEOS General Terms and Conditions of Sale Privacy Policy Search Results More Electrolysis systems No chemicals required no chemicals to be transported and no need to store and handle hazardous substances. Instead: sophisticated systems use harmless sodium chloride – ordinary salt – to produce chlorine, hydrogen and sodium hydroxide solution. CHLORINSITU® IIa Output 3 to 300 g/h sodium hypochlorite Is a compact on-site electrolysis system producing a low-chlorate sodium hypochlorite solution. BROCHURE CHLORINSITU® II Output of 50 – 2,400 g/h sodium hypochlorite Is a compact on-site electrolysis system providing a larger capacity than the IIa . BROCHURE CHLORINSITU® III Capacity 100 – 10,000 g/h. A membrane electrolysis system providing a high-purity and/or low-chloride and low-chlorate sodium hypochlorite solution. Can be used for potable water, waste water, process water, swimming pool water and in cooling tow ers. BROCHURE CHLORINSITU® III Compact Output of 25 – 50 g/h sodium hypochlorite A diaphragm electrolysis system for generating smaller capacities than the III. Ideal for smaller pools. BROCHURE CHLORINSITU® IV Compact Output of 25 – 50 g/h ultra-pure chlorine A Diaphragm electrolysis system used to generate ultra-pure chlorine gas using the vacuum process. BROCHURE CHLORINSITU® V Output of 100 – 3,500 g/h ultra-pure chlorine An Electrolysis system used to Generate ultra-pure active chlorine using the vacuum method. Suitable for metering hypochlorous acid and simultaneously correcting the pH value. BROCHURE CHLORINSITU® V Plus Output of 100 – 3,500 g/h ultra-pure chlorine An Electrolysis system used to for generation of active chlorine in combination with a sodium hypochlorite solution using the vacuum process. Chlorination and pH value adjustment from a single system. BROCHURE BROXO 6-15 Salt Water Softening Salt Approved for use with all ProMinent CHLORINSITU systems. Contact our Sales Team at sales@promin entfluid.com.au for further information and pricing.

HOME PRODUCTS AQUATIC WATER TREATMENT CHEMICAL DOSING SKIDS FEEDER PACKAGES CONTACT US TECHNICAL VIDEOS General Terms and Conditions of Sale Privacy Policy Search Results More Motor Driven Pumps Sigma/ 1 (Basic Type) Capacity range 17 – 144 l/h, 12 – 4 bar The Sigma/ 1 Basic is an extremely robust motor-driven metering pump with patented multi-layer safety diaphragm for excellent process safety. It offers a wide range of power end designs, such as three-phase or 1-phase AC motors, even for Exe and Exde areas with ATEX certification. BROCHURE TECHNICAL MANUAL Sigma/ 1 (Control Type) Capacity range 17 – 117 l/h, 12 – 4 bar The Sigma / 1 Control can be used flexibly as an extremely robust motor-driven diaphragm metering pump. Excellent process safety and reliability is guaranteed with the patented multi-layer safety diaphragm. Highlights include removable control unit, adjustable metering profiles, as well as a variety of power end and control configurations BROCHURE TECHNICAL MANUAL Sigma/ 2 (Basic Type) Capacity range 50 – 420 l/h, 16 – 4 bar Robust motor-driven diaphragm metering pumps, like the Sigma/ 2 Basic guarantee excellent process reliability with their patented multi-layer safety diaphragm. The diaphragm metering pump offers a wide range of power end versions, even for Exe and Exde areas with ATEX certification. BROCHURE TECHNICAL MANUAL Sigma/ 2 (Control Type) Capacity range 61 – 353 l/h, 16 – 4 bar The Sigma/ 2 Control is a robust motor-driven diaphragm metering pump with a patented multi-layer safety diaphragm for outstanding process safety and reliability. The integrated automatic overload shut-down offers further protection for the pump. Removable operating unit and adjustable metering profiles enable the versatile use of this pump. BROCHURE TECHNICAL MANUAL Sigma/ 3 (Basic Type) Capacity range 146 – 1,030 l/h, 12 – 4 bar The patented multi-layer safety diaphragm for excellent process safety and reliability is just one feature of the extremely robust motor-driven diaphragm metering pump Sigma/ 3 Basic. It also offers a wide range of power end versions, such as three-phase or 1-phase AC motors, even for Exe and Exde areas with ATEX certification. BROCHURE TECHNICAL MANUAL Sigma/ 3 (Control Type) Capacity range 182 – 1,040 l/h, 12 – 4 bar The motor-driven diaphragm metering pump Sigma/ 3 Control guarantees excellent process reliability, thanks to its patented multi-layer safety diaphragm. Intelligent features, such as removable operating unit and adjustable metering profiles, as well as a variety of power end and control configurations, enable the versatile use of this pump. BROCHURE TECHNICAL MANUAL Sigma Plunger Pump - Basic Type - SBKa The motor driven plunger metering pump is capable of accurate delivery rates at high pressure ranges, available in either 'Basic' or 'Control' versions with digital display and programmable capabilities. BROCHURE TECHNICAL MANUAL Sigma Family in Hygienic Design ProMinent’s new Sigma Family in Hygienic Design consists of motor-driven metering pumps, designed specially for the requirements of the food and beverage industry. The Sigma in hygienic design has a simple Stainless Steel construction making it very easy to clean. As part of the DULCONNEX fluid management system, the new Sigma has integrated CANopen and PROFIBUS interface, allowing ease of monitoring, analysing and optimisation of metering processes. BROCHURE Vario D Capacity range 16 – 63 l/h, 10 – 6 bar The motor-driven metering pump Vario D delivers a high level of process quality for continuous metering within simple metering tasks. It can be used, for example, in the metering of additives or flocculants in chemical metering. TECHNICAL MANUAL alpha Capacity range 1.0 – 30.6 l/h, 10 – 2 bar Various pump types are available as a combination of 2 gears and 4 sizes of dosing head in materials PVDF and clear acrylic/PVC, enabling you to match the pump perfectly to your metering process. BROCHURE TECHNICAL MANUAL

Ozone As the most powerful oxidant that can be used in water treatment, ozone enables a broad spectrum of possible applications: Outstanding disinfection action against Bacteria and viruses Fungi and parasites Oxidation of undesirable inorganic substances in the water Iron and manganese Arsenic Nitrite and sulfide Oxidation of undesirable organic substances in the water Strong-smelling and strong-tasting compounds Humic substances and other compounds which affect the colour of the water Cyclic hydrocarbons Trihalomethanes, chloramines and other chlorine compounds Microflocculating action After oxidation with ozone, substances and colloids dissolved in the water become insoluble and can be filtered. Significantly less environmentally-harmful by-products occur in the production and use of ozone, than with other comparable oxidants and disinfectants. As a highly reactive gas, ozone is produced on site, and introduced to the water directly, without interim storage. Because of its high reactivity, ozone decomposes into oxygen again in the water, with a half-life of several minutes. All components of an ozone handling system must be perfectly matched with each other and with the planned application, to achieve an optimal relationship between ozone production and effect. For every new project, our engineers can draw on the experience that we have continually accumulated since 1971, in the following applications: Drinking water supply Oxidation of iron, manganese or arsenic Improvement in appearance and taste Disinfection Food and beverage industry Disinfection of mineral water Disinfection at the rinser in the beverage industry Disinfection of production water Aquatics Reduction of chloramines and trihalomethanes, so avoiding typical swimming pool smell Crystal-clear water thanks to microflocculating action Reliable microbiological barriers in therapy pools Reduction of investment and operating costs through the possibility of reducing the circulating power and throttling the fresh water inlet Industry Cooling water treatment Combating legionella in cooling water circuits Disinfection of process water Removal of odorous substances in air scrubbers BROCHURE HOME PRODUCTS AQUATIC WATER TREATMENT CHEMICAL DOSING SKIDS FEEDER PACKAGES CONTACT US TECHNICAL VIDEOS General Terms and Conditions of Sale Privacy Policy Search Results More