DULCOTEST sensors for conductivity

Conductivity Sensor LMP 001

Sensor for measuring extremely low electrolytic conductivities in clear water, including water contaminated with chemicals. Features integrated temperature measurement and a DIN 4-plug.

Your Benefits

■ Measured variable: electrolytic conductivity above 0.01 µS/cm

■ Cost-effective sensor for clear, chemically contaminated water

■ Integrated Pt 100 for temperature compensation replaces separate temperature sensor and the corresponding sensor fitting

Conductivity Sensor LMP 001-HT

Sensor for measuring extremely low electrolytic conductivity in clear water, including water contaminated with chemicals. Designed for high temperatures, with integrated temperature measurement and a DIN 4-plug.

Your Benefits

■ Measured variable: electrolytic conductivity above 0.01 µS/cm

■ Cost-effective sensor for clear, chemically contaminated water

■ Integrated Pt 100 for temperature compensation replaces separate temperature sensor and the corresponding sensor fitting

■ Temperature resistance up to 100 °C

Conductivity Sensor LMP 01

Sensor for measuring low electrolytic conductivities in clear water, including water contaminated with chemicals. Features integrated temperature measurement and a DIN 4-plug.

Your Benefits

■ Measured variable: electrolytic conductivity above 0.1 µS/cm

■ Cost-effective sensor for clear, chemically contaminated water

■ Integrated Pt 100 for temperature compensation replaces separate temperature sensor and the corresponding sensor fitting

Conductivity Sensor LMP 01-TA

Sensor for measurement of low electrolytic conductivities in clear water, including water contaminated with chemicals. Features integrated temperature measurement and a DIN 4-plug

Your Benefits

■ Measured variable: electrolytic conductivity above 0.1 µS/cm

■ Cost-effective sensor for clear, chemically contaminated water

■ Simple installation in tanks and containers by sensor ready mounted in the immersion tube

■ Integrated Pt 100 for temperature compensation replaces separate temperature sensor and the corresponding sensor fitting

Conductivity Sensor LMP 01-HT

Sensor for measuring low electrolytic conductivities in clear water, including water contaminated with chemicals. Designed for high temperatures, with integrated temperature measurement and a DIN 4-plug

Your Benefits

■ Measured variable: electrolytic conductivity above 0.1 µm/cm

■ Cost-effective sensor for clear, chemically contaminated water

■ Temperature resistance up to 100 °C

■ Integrated Pt 100 for temperature compensation replaces separate temperature sensor and the corresponding sensor fitting

Conductivity Sensor Conductivity Sensor LFT 1 FE

Affordable sensor for measuring electrolytic conductivity in clear, uncontaminated water. Features integrated temperature measurement and a hardwired connection

Your Benefits

■ Measured variable: electrolytic conductivity above 10 µS/cm

■ Cost-effective sensor for all clear uncontaminated water

■ Flexible process connection by the use of sensor fittings for standard pH sensors

■ Special graphite electrodes, optimised for a highly dynamic measuring range: 0.01-20 mS/cm

■ Integrated Pt 100 for temperature compensation replaces separate temperature sensor and the corresponding sensor fitting

■ Fixed cable on the sensor head for difficult ambient conditions

Conductivity Sensor LFTK 1 FE-5m-shd

Affordable sensor for measuring electrolytic conductivity in clear, uncontaminated water. Features integrated temperature measurement and a fixed cable connection (5 m)

Your Benefits

■ Measured variable: electrolytic conductivity above 10 µS/cm

■ Cost-effective sensor for all clear uncontaminated water

■ Flexible process connection by the use of sensor fittings for standard pH sensors

■ Special graphite electrodes, optimised for a highly dynamic measuring range: 0.01-20 mS/cm

■ Integrated Pt 1000 for precise temperature compensation in limited temperature ranges replaces separate temperature sensor and the

corresponding sensor fitting

■ Fixed cable on the sensor head for difficult ambient conditions

Conductivity Sensor LFTK 1 FE-3m-shd

Affordable sensor for measuring electrolytic conductivity in clear, uncontaminated water. Features integrated temperature measurement and a fixed cable connection (3 m)

Your Benefits

■ Measured variable: electrolytic conductivity above 10 µS/cm

■ Cost-effective sensor for all clear uncontaminated water

■ Flexible process connection by the use of sensor fittings for standard pH sensors

■ Special graphite electrodes, optimised for a highly dynamic measuring range: 0.01-20 mS/cm

■ Integrated Pt 1000 for precise temperature compensation in limited temperature ranges replaces separate temperature sensor and the

corresponding sensor fitting

■ Fixed cable on the sensor head for difficult ambient conditions

Conductivity Sensor LFT 1 DE

Affordable sensor for measuring electrolytic conductivity in clear, uncontaminated water. Features integrated temperature measurement and a
DIN 4-plug

Your Benefits

■ Measured variable: electrolytic conductivity above 10 µS/cm

■ Cost-effective sensor for all clear, uncontaminated types of water

■ Flexible process connection by the use of sensor fittings for standard pH sensors

■ Special graphite electrodes, optimised for a highly dynamic measuring range: 0.01-20 mS/cm

■ Integrated Pt 100 for temperature compensation replaces separate temperature sensor and the corresponding sensor fitting

■ DIN 4-pin plug for simple installation

Conductivity Sensor LFTK 1 DE

Affordable sensor for measuring electrolytic conductivity in clear, uncontaminated water, with integrated temperature measurement and a DIN 4-plug

Your Benefits

■ Measured variable: electrolytic conductivity above 10 µS/cm

■ Cost-effective sensor for all clear uncontaminated water

■ Flexible process connection by the use of sensor fittings for standard pH sensors

■ Special graphite electrodes, optimised for a highly dynamic measuring range: 0.01-20 mS/cm

■ Integrated Pt 100 for temperature compensation replaces separate temperature sensor and the corresponding sensor fitting

■ DIN 4-pin plug for simple installation

Conductivity sensor LFT 1 1/2"

Affordable sensor for measuring electrolytic conductivity in clear, uncontaminated water. Features integrated temperature measurement, a DIN 4-plug, and a 1/2-inch screw-in thread

Your Benefits

■ Measured variable: electrolytic conductivity above 10 µS/cm

■ Cost-effective sensor for all clear, uncontaminated types of water

■ Hydraulic connector with 1/2" thread as an alternative to the corresponding standard design with PG 13.5 thread

■ Special graphite electrodes, optimised for a highly dynamic measuring range: 0.01-20 mS/cm

■ Integrated Pt 100 for temperature compensation replaces separate temperature sensor and the corresponding sensor fitting

■ DIN 4-pin plug for simple installation

Conductivity Sensor CK 1

Sensor for the measurement of electrolytic conductivity in clear, chemically contaminated water at higher but constant temperatures, with a DIN 4-plug

Your Benefits

■ Measured variable: electrolytic conductivity above 10 µS/cm

■ Resistant to water ingredients in target applications thanks to injection-moulded design without adhesive or seals

■ High temperature resistance up to 135 °C

Conductivity Sensor CKPt 1

Sensor for measurement of electrolytic conductivity in clear, chemically contaminated water and at higher temperatures. Features integrated temperature measurement and a DIN 4-plug.

Your Benefits

■ Measured variable: electrolytic conductivity above 10 µS/cm

■ Resistant to water ingredients in target applications thanks to injection-moulded design without adhesive or seals

■ High temperature resistance up to 135 °C

■ Integrated Pt 100 for temperature compensation replaces separate temperature sensor and the corresponding sensor fitting

Conductivity Sensor LM 1

Sensor for the measurement of electrolytic conductivity in clear water, including water contaminated with chemicals. With DIN 4-plug.

Your Benefits

■ Measured variable: electrolytic conductivity above 0.1 mS/cm

■ Cost-effective sensor for clear, chemically contaminated water

■ Resistant to the constituents in the water of the target application

Conductivity Sensor LM 1-TA

Sensor for the measurement of electrolytic conductivity in clear water, including water contaminated with chemicals. Fully assembled in an immersion fitting

Your Benefits

■ Measured variable: electrolytic conductivity above 0.1 mS/cm

■ Cost-effective sensor for clear, chemically contaminated water

■ Resistant to the ingredients in the water of the target applications

■ Simple installation in tanks, containers etc. by sensor ready mounted in the immersion tube

Spare Parts

Conductivity Sensor LMP 1

Sensor for measuring electrolytic conductivity in clear water, including water contaminated with chemicals. Features integrated temperature measurement and a DIN 4-plug.

Your Benefits

■ Measured variable: electrolytic conductivity above 0.1 mS/cm

■ Cost-effective sensor for clear, chemically contaminated water

■ Resistant to the ingredients in the water of the target applications

■ Integrated Pt 100 for temperature compensation replaces separate temperature sensor and the corresponding sensor fitting

Conductivity Sensor LMP 1-TA

Sensor for measuring electrolytic conductivity in clear water, including water contaminated with chemicals. Features integrated temperature measurement and is fully assembled in an immersion fitting.

Your Benefits

■ Measured variable: electrolytic conductivity above 0.1 mS/cm

■ Cost-effective sensor for clear, chemically contaminated water

■ Resistant to the ingredients in the water of the target applications

■ Integrated Pt 100 for temperature compensation replaces separate temperature sensor and the corresponding sensor fitting

■ Simple installation in tanks, containers etc. by sensor ready mounted in the immersion tube

Spare Parts

Conductivity Sensor LMP 1-HT

Sensor for measuring electrolytic conductivity in clear water, including water contaminated with chemicals. Designed for high temperatures, with integrated temperature measurement and a DIN 4-plug.

Your Benefits

■ Measured variable: electrolytic conductivity above 0.1 mS/cm

■ Cost-effective sensor for clear, chemically contaminated water

■ Resistant to the ingredients in the water of the target applications

■ Integrated Pt 100 for temperature compensation replaces separate temperature sensor and the corresponding sensor fitting

■ Temperature resistance up to 100 °C

Conductivity sensor CCT 1-mA

Sensor for measurement of electrolytic conductivities for clear and also chemically contaminated water. With integrated temperature measurement and factory-calibrated 4...20 mA output signal.

Your Benefits

■ Measured variable: electrolytic conductivity up to 100 mS/cm

■ Fail-safe 4-20 mA output signal for flexible connection to measuring equipment with standard 4-20 mA input

■ Integrated temperature sensor for temperature compensation replaces separate temperature sensor and the corresponding sensor fitting

■ Simple connection to a process with the ProMinent bypass fittings BAMa, DGMA, DLGIII and INLI

Conductivity sensor ICT 5

Cost-effective inductive conductivity sensor, suitable for high electrolytic conductivities above 200 µS/cm. Also suitable for chemically contaminated water and film-forming media. For installation in pipework

Your Benefits

■ Measured variable: electrolytic conductivity. The inductive (non-contact) measuring principle permits applications in chemically contaminated types

of water and in film-forming media

■ Complete with injection moulded PP sensor head, no apparent bonds, seals

■ Measurements at high conductivity values of up to 2,000 mS/cm are possible without interfering polarisation by means of the high measuring range

dynamics of the inductive measuring principle

■ Simple installation in PVC pipework by bonding the DN 40 adhesive connector supplied into a standard T-piece and screwing in the sensor using the

union nut supplied.

■ A DN 40 welded connector is optionally available for use in PP pipework

Conductivity Sensor ICT 5-IMA

Cost-effective inductive conductivity sensor, suitable for high electrolytic conductivities above 200 µS/cm. Also suitable for chemically contaminated water and film-forming media. Completely integrated into an immersion pipe

Your Benefits

■ Measured variable: electrolytic conductivity. The inductive (non-contact) measuring principle permits applications in chemically contaminated types

of water and in film-forming media

■ Complete with injection moulded PP sensor head, no apparent bonds, seals

■ Measurements at high conductivity values of up to 2,000 mS/cm are possible without interfering polarisation by means of the high measuring range

dynamics of the inductive measuring principle

■ Simple installation in tanks, containers etc. thanks to sensor ready mounted in the immersion tube

Conductivity Sensor ICT 2

High-performance inductive conductivity sensor with high dynamic measuring range. Also suitable for types of water with aggressive chemicals and film-forming components. Permitted temperatures up to 125 °C. For installation in pipework, tanks and for immersion in storage tanks

Your Benefits

■ Measured variable: electrolytic conductivity. The inductive (non-contact) measuring principle permits applications in chemically

contaminated types of water and in film-forming media

■ There is no need for adhesive or seals as the sensor is fully embedded in PFA

■ Measurements at high conductivity values of up to 2,000 mS/cm are possible without interfering polarisation by means of the high

measuring range dynamics of the inductive measuring principle

■ Flexible connection to the processes is possible via a flange or immersion pipe with optional accessories

Conductivity sensor ICT 8-mA

Inductive sensor for the measurement of electrolytic conductivity. Suitable for contaminated water. With integrated temperature correction and factory-calibrated 4...20 mA output signal.

Your Benefits

■ Measured variable: electrolytic conductivity. The inductive (non-contact) measuring principle permits applications in chemically contaminated types

of water and in film-forming media

■ There is no need for adhesive or seals as the sensor is fully embedded in PFA

■ Measurements at high conductivity values of up to 2,000 mS/cm are possible without interfering polarisation by means of the high measuring range

dynamics of the inductive measuring principle

■ Flexible connection to the processes is possible via a flange or immersion pipe with optional accessories

Contact Us

ProMinent Australia

+61 2 9450 0995

Send request