DULCOTEST sensors for chlorine dioxide

DULCOTEST sensors for chlorine dioxide.png

Technical Details

Sensor type CDE 2-mA

■ Measuring ranges 0.01…10 mg/l

■ Temperature 5…45 °C

■ Pressure max. 1.0 bar

■ pH range 4.0…11.0

■ Response time 120 s

Sensor type CDP 1-mA

■ Measuring ranges 0.02…2.00 mg/l

■ Temperature 10…45 °C

■ Pressure max. 3.0 bar

■ pH range 5.5…10.5

■ Response time 60 s

Sensor type CDR 1-mA

■ Measuring ranges 0.01…10.0 mg/l

■ Temperature 1…55 °C

■ Pressure max. 3.0 bar

■ pH range 1.0…10.0

■ Response time 180 s

Chlorine Dioxide Sensor CDE 2-mA

Standard sensor for the measurement of chlorine dioxide without cross-sensitivity by free chlorine. For operation on controllers with 4-20 mA input

Your Benefits

■ Measured variable: Chlorine dioxide, no cross-sensitivity towards free chlorine

■ Diaphragm-covered sensor minimises faults caused by changing flow or ingredients in the water

Chlorine dioxide sensors complete with 100 ml of electrolyte

Note: a mounting kit (order no. 815079) is required for initial fitting of the chlorine dioxide sensors in the in-line probe housingDLG III.

Chlorine Dioxide Sensor CDP 1-mA

Sensor for the measurement of chlorine dioxide with a fast response time, for example in bottle-washing systems. For operation on controllers with 4-20 mA input

Your Benefits

■ Measured variable: Chlorine dioxide without interference caused by surfactants

■ Diaphragm-covered sensor minimises faults caused by changing flow or ingredients in the water

■ Fast response time through open-pored diaphragm and external temperature measurement

Chlorine dioxide sensors complete with 100 ml of electrolyte

Note: a mounting kit (order no. 815079) is required for initial fitting of the chlorine dioxide sensors in the in-line probe housing DLG III.

Chlorine Dioxide Sensor CDR 1-mA

Sensor for the measurement of chlorine dioxide for all kinds of water, including hot and contaminated water. Without cross-sensitivity by free chlorine. For operation on controllers with 4-20 mA input

Your Benefits

■ Measured variable: Chlorine dioxide, without cross-sensitivity towards free chlorine

■ Diaphragm-covered sensor minimises faults caused by changing flow or ingredients in the water

■ Resistance to films of dirt by pore-free diaphragm

■ Operating temperature up to 60 °C (short term) by appropriate sensor materials

Note: a mounting kit (order no. 815079) is required for initial fitting of the chlorine dioxide sensors in the in-line probe housing DLG III.

Chlorine Dioxide Sensor CDR 1-CAN

Sensor for the measurement of chlorine dioxide for all kinds of water, including hot and contaminated water. Without cross-sensitivity by free chlorine. For operation on controllers with 4-20 mA input

Your Benefits

■ Measured variable: Chlorine dioxide, without cross-sensitivity to free chlorine

■ Diaphragm-covered sensor minimises faults caused by changing flow or ingredients in the water

■ Resistance to films of dirt by pore-free diaphragm

■ Operating temperature up to 60 °C (short term) by appropriate sensor materials

■ Operation on the CAN-bus with all the associated benefits

Contact Us

ProMinent Australia

+61 2 9450 0995

Send request