Technical Details​
â– inorganic free bromine, e.g. using the ACTI bromine process: HOBr, or inorganically bound bromine (proprietary names include Stabrex®)
â– DBDMH (1,3-dibromo-5,5-dimethylhydantoin), proprietary names include Albrom 100®
â– BCDMH (1-bromo-3-chloro-5,5-dimethylhydantoin), proprietary names include Brom-Sticks®
​​​
Sensor for Total Available Bromine BCR 1-mA (Replaces Earlier Type BRE 1)
Sensor for the disinfectant BCDMH and other oxidative-acting bromine-organic disinfectants and total chlorine even in contaminated water and/or for high pH values of up to 9.5. For use on controllers with mA input
​
Your Benefits
â– Measured variable: total available bromine from BCDMH (1-bromo-3-chloro-5,5-dimethylhydantoin)
â– Diaphragm-covered sensor minimises faults caused by changing flow or ingredients in the water, N-bromamide sulfonate
â– Resistance to blocking is achieved by the use of an electrolyte with an antimicrobial effect (less blocking by biofilms) and by a large-pored
diaphragm (less blocking by solid particles/dirt)
â– Use with high pH values by optimisation of the electrolyte diaphragm system
​
Sensor for total available bromine BRE 3-CAN
Sensor for free and combined bromine, also for use with slightly contaminated water. For use on controllers with CAN-bus connection
​
Your Benefits
â– Measured variable: total available bromine from BCDMH and other oxidative-acting bromine organic disinfectants
â– Diaphragm-covered sensor minimises faults caused by changing flow or ingredients in the water
â– Use with high pH values by optimisation of the electrolyte diaphragm system
â– Operation on the CAN-bus with all the associated benefits
​
Note: a mounting kit (order no. 815079) is required for initial fitting of the bromine sensors in the in-line probe housing DLG III.
​
Sensor for Free and Combined Bromine CBR 1-mA (Replaces Earlier Type BRE 2)
Sensor for free chlorine and bromine in contaminated water, also suitable for high pH values of up to 9.5. For use with controllers with 4-20 mA input
​
Your Benefits
â– Measured variable: free chlorine, as well as free and combined bromine (bromamines)
â– Diaphragm-covered sensor minimises faults caused by changing flow or ingredients in the water
â– Resistance to films of dirt and biofilms by electrolyte with antimicrobial effect and large-pore diaphragm
â– Use at high pH value of up to 9.5 by optimisation of the electrolyte diaphragm system
​
​Sensor for free chlorine CBR 1-CAN
Sensor for free chlorine and bromine in contaminated water, also suitable for high pH values of up to 9.5. For use on controllers with CAN-bus connection.
​
Your Benefits
â– Measured variable: free chlorine as well as free and combined bromine (bromamines)
â– Diaphragm-covered sensor minimises faults caused by changing flow or ingredients in the water
â– Resistance to films of dirt and biofilms by electrolyte with antimicrobial effect and large-pore diaphragm
â– Use at high pH value of up to 9.5 by optimisation of the electrolyte diaphragm system
​
